Autumn Sale

Everbuild KOS Heat Resistant Premium Fire Cement - 500g

£5.40 £4.50
Availability : In Stock
Did you find this item priced lower than £4.50 somewhere else? Yes

Found a Lower Price elsewhere? Then try our Instant Price Beater

Everbuild KOS Heat Resistant Premium Fire Cement - 500g

Premium Fire Cement is a ready to use putty consistency product which withstands the heat. It is resistant up to 1250oC. The cement can be used in repairing fire bricks, fireplaces, boilers, etc.

Uses:

• For sealing and jointing internal flue pipes

• Repairing small cracks and damage on firebricks

• Repairing  firebacks

• Seals and small repairs on fireplaces, gas cookers, stoves and ranges, central heating systems and boilers.

Preparation

For maximum adhesion, remove all dirt, dust and rust, and make sure the area is thoroughly clean.

Application:

Premium Fire Cement should be used straight from tub. Apply with a trowel, knife or hand and work well into the area. Fine joints can be made. As soon as possible, gently heat dry the repaired surfaces, gradually raising the heat to full operating temperature over 3-4 hours. Apply further cement to any fine cracks which may appear.

Storage:

Keep any unused material dry and store in a cool dry place away from children and pets. In case of contact with skin and eyes rinse immediately with plenty of water and seek medical advice. After contact with skin, wash with water. Wear suitable gloves and eye face protection. Keep out of reach of children.

Disclaimer:

These instructions and recommendations define the material and the method of use but cannot be considered as a substitute for the skills, training and qualifications of the contractor.

In addition to these recommendations, the requirements of the building regulations, the recommendations of the appliance manufacturer and general health & safety considerations may be applicable.

Vitcas Ltd guarantees the quality of the products but has no control over the way in which the products are used. If there is any doubt the customer is advised to carry out his own trials of the materials before starting the work.

Weight0.5kg
More Information
BrandFlame Fireplaces Spare Parts
EANFP11000000785
Colour OptionsBlack
Suitable for new natural gasNo
Power Vent possibleNo
230V necessaryNo
Suitable For Non Constructional 12mm HearthNo
Weight0.5kg

   Frequently Asked Questions and Answers


   Ask a question

Terms & Conditions

There is no content for Term & Conditions.
I Agree with the Terms

Customer Reviews

 
 
 
 
 
Be the first to review this product
Pallet Delivery
 
All larger items above 30kgs, including stoves, are shipped via the United Pallet Network.
 
In-stock items are dispatched within 48 hours and delivery lead time is generally 4 working days. Off shore and Highland locations can take up to 7 working days and can incur an additional charge.
 
The delivery is arranged/booked between the customer and the local area United Pallet Network Courier, who will contact by phone the day prior to delivery. If a different date is required, please arrange this direct with the courier. Also, pass on site access information if required. Couriers provide a tail lift kerb side service and are not insured to take goods into your property.
 
Light Goods
 
All light goods including Spare Parts are delivered via the Royal Mail and couriers including EVRI and DPD. Tracking information is available on request.
 
NOTE that we advise that you do not book Installation Contractors and Tradesmen until you have received your goods. Delays within the network can occur unexpectedly.
Warranty Cover varies between Manufacturers and Products and is effective from date of purchase Invoice. It is recommended to consult your Product Manual for further details. Warranty and Product Registration can be done directly on manufacturer website.
 
NOTE that consumables parts [Glass, Fire Brick, Grates, Baffles Plate] are not covered under Warranty unless stated otherwise. Improper use, lack of cleaning and maintenance evidence, unauthorised modifications, and improper installation will also affect Warranty Cover.