FAQ - Stove Installation
Find answers to common questions about installing your stove.
Please refer to your Stove Installation Guidelines. Each stove will have a recommended Distance to Combustible [DTC] material that needs to be adhered to for the safe installation of your stove. These distances can be reduced by installing a Heat Shield either on the rear of the stove or on the wall behind and side of the stove. Please refer to your Stove Installation Guidelines and your Installer.
In theory this is feasible but there are some issues to consider regarding 'distance to combustible materials'. The heat from the stove can damage the TV and affect its performance. It's important to ensure proper ventilation and consider using a heat shield to protect the TV. Always check the manufacturer’s guidelines for both the stove and the TV for specific recommendations on placement.
Several factors influence whether a chimney, flue, or fireplace is suitable for stove installation. For this reason, we strongly recommend that you consult with a Heating Engineer or Stove Installer to conduct a thorough site survey and assess the condition of your fireplace and chimney. They can then advise on the best product for your needs.
It's also a legal requirement to notify your building control body when installing wood or solid fuel appliances. Alternatively, several Competent Person Schemes in the UK allow members to self-certify that the installation complies with the Building Regulations in England and Wales.
You cannot add a back boiler to an existing stove, however, you can purchase a stove that has a Built-In, Integrated, Wrap-a-round back boiler capable of heating the central heating and hot water.
You will need a flue liner if your existing chimney is damaged or deemed unsuitable or potentially hazardous. This could be due to the age of the property, where the interior surfaces of the chimney have deteriorated, become uneven, or are leaking. A flue liner addresses these issues, providing a new, efficient, and safe chimney system that is easy to clean and maintain.
If you have a Class 1 chimney, you may or may not need a liner, depending on the condition and diameter of the chimney. It's important to have a professional engineer conduct a site visit to assess the chimney and provide the best advice for your specific installation. They will evaluate factors such as the chimney's condition, size, and suitability for the stove you plan to install.
A rear heat shield is often an optional accessory that attaches to the back of the stove. Its primary function is to reduce the amount of heat transferred or radiated from the stove’s back. This allows for a reduced clearance between the stove and non-combustible materials like brickwork or masonry. However, even with a rear heat shield, the stove should never be placed directly against or too close to any non-combustible material, as this could be unsafe or impractical.
Yes, stoves with an output above 5kW generally require an airbrick or a direct air kit to ensure proper combustion. This is because a stove with a higher output needs a sufficient air supply to operate efficiently and safely. If an airbrick is not feasible, a direct air kit can be used to supply fresh air from outside the building directly to the stove. Always consult with a professional installer to ensure compliance with building regulations and safety standards.
Document J states that a distance of 450mm is required above the stove to the bottom of combustible material.
